What is the reason for the damage of the mold during the production of metal stamping parts? +300 play the next day's production capacity

When the metal stamping parts are produced, the stamping part die is often damaged. Then I will take you to see what causes it: The heat treatment process of the stamping die material has a great influence on it. If the quenching temperature of the stamping die is too high, the quenching method and time are unreasonable, as well as the number and temperature of tempering, and the improper selection of the elbow tube elbow will cause the die to be damaged after the stamping production. The size or depth of the blanking hole of the metal stamping die is not designed enough, which will easily block the slot and cause damage to the blanking board. If the design of the spring force is too small or the contour sleeves are not equal in height, the spring will be broken and the blanking plate will be tilted. This will cause overlapped punching and damage the parts. Improper fixing of the punch of the metal stamping die or insufficient screw strength will cause the punch to fall or break. Therefore, it is necessary to check whether the manufacturing material of the stamping die is suitable, and whether the corresponding hot embedding process is reasonable. When using metal stamping molds, the position and direction of the parts are installed incorrectly or the bolts are not tightened well. The working height is adjusted too low and the guide post is insufficiently lubricated. Failure of the feeding equipment, abnormal press, etc. will cause damage to the stamping die. If foreign matter enters the stamping die, overlapping parts, and waste blockage are not handled in time and continue processing and production, it is easy to damage the blanking plate, punch, lower template and guide post of the die. Hardware, 15 years of focus on metal stamping parts, 5000 square meters workshop, hundreds of precision processing production equipment. Monthly processing capacity of 100+ sets of molds, more than 20 mold Ru0026D and design engineers, and a daily production capacity of 3 million strokes. It can quickly solve the time-critical problem of metal stamping parts, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose rest assured!