Which is the strongest Dongguan cold stamping processing plant? I only recommend hardware

Cold stamping is a processing method that uses a die to apply pressure to a material on a press at room temperature to separate or deform it to obtain a part of a certain shape, size and performance. Cold stamping is a processing method that uses a stamping die at room temperature. A pressure processing method that applies pressure to the sheet or hot material on the machine to cause plastic deformation or separation to obtain parts of the required shape and size. In the cold stamping process, the cold stamping die is the process equipment used in the stamping process. Without advanced cold stamping dies, advanced stamping processes cannot be achieved. Due to the different shape, size and accuracy of the part bai, the process sequence used in the stamping process is also different. According to the deformation characteristics of the material, the cold stamping process can be divided into two types: separation process and forming process. (1) Separation process-refers to the blank after the stress of the deformed part reaches the strength limit σb under the action of the pressing force, the blank is broken and separated. The separation process mainly includes cutting and punching. (2) Forming process-refers to the processing of the blank in which the stress of the deformed part reaches the yield limit σs but does not reach the strength limit σb under the action of the pressing force, which causes the blank to plastically deform and becomes a workpiece with a certain shape, size and precision Process. The forming process mainly includes bending, deep drawing, flanging, spinning and so on. Dongguan Hardware, a hardware stamping parts manufacturer with 15 years of experience, complete equipment, one-stop service, with a daily output of 30 million stamping cycles, is an ideal choice for your hardware stamping parts manufacturer. If you need more information, welcome to consult the company website: