Yangjiang metal stamping parts processing plant, the cause and solution of material rebound + 3 million punching next day production capacity

The stamping production staff of the Yangjiang metal stamping parts processing plant said that there are some more complicated stamping parts, and the properties of the metal materials will be different according to the different materials selected, so they will encounter the problem of material rebound, so how do you get it? How to solve this problem? Let me understand with you the following: Analysis of the cause of springback: The positioner is worn out and deformed, and the strip is inaccurately positioned, and a new positioner must be replaced; In a non-guided bending die, the pressure is adjusted on the press Improper adjustment of the position of the bottom dead center of the machine slider will also cause the shape and size of the bent part to be unqualified; the pressing device of the mold fails or does not have a pressing effect at all, the pressing force must be re-adjusted or the pressure spring must be re-adjusted to make it work properly. In view of the poor springback of the Yangjiang hardware stamping parts processing plant, Xiaoshuo suggested to deal with the opinions: select stamping materials with large elastic modulus and small yield point and relatively stable mechanical properties; increase the correction process, use correction bending instead of free bending; materials must be carried out before bending Annealing makes the cold work hardened material soften in advance and then bend into shape. If the shape deformation occurs during the stamping process and it is difficult to remove; the slope of the punch and the die should be replaced or trimmed, and the gap between the punch and the die should be equal to the smaller material thickness; the contact area between the die and the workpiece should be increased, and the convexity should be reduced. The contact area between the mold and the workpiece. Hardware, 15 years of focusing on Yangjiang metal stamping parts processing plant, rich experience in custom processing and production of 20,000+ sets of molds, product accuracy can reach 0.01MM, daily production capacity of 3 million punching times and 16 quality inspections strictly for quality control. It can quickly solve your time-critical problems, solve your product accuracy problems, and solve your hardware stamping parts quality requirements. Choose, choose to rest assured!