Cangzhou mold stamping parts processing plant, mold structure and classification + more than 20 mold R u0026 D engineers

The technicians of Cangzhou Die Stamping Parts Processing Factory have introduced the structure and classification of stamping dies. Do you know all about these? The following Xiaoshuo collected some relevant knowledge, and take everyone to take a look: Die structure: Die is a tool to separate or deform the sheet. It is composed of two parts, an upper mold and a lower mold. The die handle of the upper die is fixed on the slider of the punch and moves up and down with the slider, while the lower die is fixed on the worktable of the punch. The punch and the die are the working parts of the die that deform or separate the blank, and are fixed on the upper and lower templates with a pressure plate. The upper and lower templates are respectively equipped with guide sleeves and guide posts to guide the alignment of the punch and the die. The guide plate and the positioning pin are respectively used to control the feeding direction and length of the blank. The function of the discharge plate is to release the workpiece or blank from the punch after punching. Classification of die: die is an indispensable die in stamping production. Die can basically be divided into three types: simple die, continuous die and compound die. (1) Simple die: Simple die is a die that only completes one process in one stroke of the press. (2) Continuous die: A die that simultaneously completes several stamping processes on different parts of the die in one stroke of the press is called a continuous die. (3) Compound die: A die that completes several stamping processes on the same part of the die at the same time in one stroke is called a composite die. Hardware, 15 years of focus on Cangzhou mold stamping parts processing plant, 20,000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punching times, silk-like stamping accuracy Up to 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!