Guangzhou metal stamping parts processing plant, stamping precautions + 15 years stamping experience team

Stamping is an extremely dangerous industry, and accidents often occur. The technicians of the hardware stamping parts processing plant in Guangzhou have said that they often pay attention to the stamping process. Xiaoshuo has compiled some information, and let everyone know about it: 1. Check the equipment according to the inspection content on the equipment check card, pay special attention Whether the guiding and braking devices of the punching machine are operating normally, the functions of single punching and continuous punching are distinct. 2. When installing the mold on a small punch (10T), first loosen the locking device of the guide rail, install the upper and lower molds, and then adjust the guide rail stroke until the requirements are met and the fastening device is locked. After hitting the single stroke stroke, the upper mold is locked, and the lower mold is locked after hydraulic clamping. Check again before production. 3. Special tools (pliers, hooks) must be used when discharging or manually feeding and picking the blanks individually. It is strictly forbidden to send or pick up the blanks by hand. A single switch will hurt your hands, but a double switch. The machine must not leak oil, otherwise it will fall off. Do not expose the power source, which is dangerous. 4. Wear gloves and concentrate when punching iron sheets, otherwise your hands will be injured. 5. During work, first check whether there are any abnormalities in the operation of the equipment, such as unclear orders, continuous rushing, inoperable operation or electrical failures, immediately stop the machine and ask the technician on duty to deal with it. 6. It is strictly forbidden to use the foot switch on the punch, and all the original equipment of the machine should be removed. 7. When cleaning and inspecting the equipment, be sure to cut off the power supply. 8. Cut off the power supply, clean and scrub the work surface, remove the mold for maintenance and storage, and check the lubrication system oil at a certain time every week. Dongguan Hardware Co., Ltd., 15 years of experience in stamping parts production, more than 20 mold Ru0026D and design engineers, 5000 square meters workshop, hundreds of precision machining production equipment, 3 million punching next-day production capacity, 20000+ sets of stamping die customized production experience, stamping The precision of machining parts can reach 0.01mm. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!