One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
CNC lathe parts&cnc machined parts are widely used in electronics, household appliances, and automobiles. Compared with stamped parts, the product has higher precision and higher concentricity and roughness requirements. In Dongguan Fortuna Metals Co., Ltd.(CNC machined parts manufacturer), the machining diameter of CNC parts is 1.0mm-25mm, and the processing precision can reach 0.005mm. Now we possess 35 sets of Japanese- imported 5 axis CNC lathes.
The following is a brief introduction of the advantages of the CNC machining center:
(1) Comprehensive functions of CNC machining center
The CNC machining center is a CNC machining machine with more complete functions. It concentrates the functions of milling, boring, drilling, tapping and thread cutting on a single device, so that it has a variety of technological means. The machining center is provided with a tool magazine, which stores different numbers of various tools or inspection tools, which are automatically selected and replaced by the program during the machining process.
(2) The high degree of automation of CNC machining center
After the workpiece is clamped once on the machining center, the digital control system can control the machine tool to automatically select and replace the tool according to different processes, automatically change the machine tool spindle speed, feed rate, tool movement path relative to the workpiece, and other auxiliary functions, which are completed in sequence. Multi-process machining on several surfaces of the workpiece, and has a variety of tool change or tool selection functions.
(3) The utilization rate of the CNC machining center is high
Due to the concentration of processes and automatic tool change, the machining center reduces the time of workpiece clamping, measurement and machine tool adjustment, etc., so that the cutting time of the machine tool reaches about 80% of the start-up time of the machine tool (common machine tools are only 15-20%); It also reduces the time between workpiece turnover, handling, and storage, shortens the production cycle, and has obvious economic effects. The machining center is suitable for small and medium batch production with complex parts, high precision requirements, and frequent product replacement.
(4) The precision of the CNC machining center is higher
The processing quality of the CNC machining center is stable, and the production efficiency is high in the case of multi-variety and small-batch production. It can reduce the time for production preparation, machine tool adjustment, and process inspection, and the cutting time is reduced due to the use of the optimal cutting amount. Conventional methods are difficult to process complex profiles, and even can process some unobservable parts.