Stamping parts manufacturer, mold production quality standard size precision manufacturer

In the actual production process of stamping parts factory, stamping die plays a key and important factor. The precision, quality and efficiency of a product are basically controlled by the die. Xiaoshuo will take you to understand: 1. Mould parts, which are directly in contact with the stamping material and apply pressure to it to complete the stamping process. The working parts of the die include a punch, a die, and a punch and a die, which are also called forming parts, which are more important parts in the die. 2. Position the parts. It is to determine the correct position of the material or process parts in the die, so that the stamping parts can obtain qualified quality requirements. The positioning parts belonging to the feeding guide include guide pins, guide plates, side pressure plates, etc.; the positioning parts belonging to the feeding distance include starting stop pins, stop pins, guide pins, side edges, etc.; belong to block materials or The positioning parts of the process parts include positioning pins, positioning plates and so on. 3. Pressing and unloading parts. This kind of parts play the role of pressing materials, and ensure that the waste or stamping parts stuck on the punch and the cavity L are unloaded or pushed (ejected) to ensure that the stamping work can continue. The function of the holding plate is to prevent the blank from moving and bouncing. The function of the unloading board is to facilitate the discharging and cleaning of waste materials. Usually, the unloading device refers to the removal of stamping parts or waste from the punch; the pusher and ejector device refers to the removal of the stamping or waste from the die. Generally, the one installed in the upper mold is called the pusher: the one installed in the lower mold is called the top. 4. The main function of the guide parts is to ensure the accuracy of the mutual position between the male mold and the female mold, and to ensure that each part of the mold maintains a good state of motion. It is composed of a guide post, a guide sleeve, and a guide plate. 5. The supporting part connects and fixes the above-mentioned various parts to a certain position, or connects the die with the press. It is the basic part of the die. It mainly includes upper mold base, lower mold base, fixed plate, backing plate, mold handle, etc. 6. Fasten parts. Mainly used to fasten and connect various die parts, such as various bolts, screws, round pins, etc. The above-mentioned guide parts and supporting parts are called a mold base after being assembled. The mold base is the skeleton of the entire mold, all parts of the mold are fixed on it, and bear all the loads in the stamping process. The upper mold base of the mold base is connected with the press slide block through a mold handle, and the lower mold base is fixed on the work table of the press with a screw pressing plate. The guide device of the mold base between the upper and lower molds maintains its precise position to guide the movement of the punch and ensure the uniform gap during the stamping process. The mold base and its components have been standardized, and certain technical conditions have been specified for it. Hardware, 15 Shang’s ingenuity focus on stamping parts production plant, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality inspections strictly. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!