Dongguan hardware stamping factory, which one is better for customized production

When choosing Dongguan hardware stamping factory, you expect a model to be punctual and high-quality. The mold has high precision and efficiency can keep up with the progress of research and development. What about the manufacturers with qualified production quality and qualified services? Yes, most of the stamping parts are customized parts, which require the technology of the stamping plant, the quality of the stamping plant, and the service cooperation of the stamping plant. In general, what details should be paid attention to in the manufacturing process: 1. When designing the structural shape of the metal stamping parts, the surface and combination of simple and reasonable structure should be used. At the same time, the number of processed surfaces and the smallest processing area should be minimized. 2. Choose a reasonable method of blank preparation in mechanical manufacturing, which can directly use profile, casting, forging, stamping and welding. The selection of the blank is related to the specific production technical conditions, and generally depends on the production batch, material properties and processing possibilities. 3. The requirements of metal stamping forming performance, in order to facilitate stamping deformation and the improvement of the quality of the parts, the material should have good plasticity, small yield ratio, large plate thickness directivity coefficient, small plate directivity coefficient, and material yield The ratio of strength to elastic modulus is small. The separation process does not require a material with good plasticity, but a material with a certain degree of plasticity. 4. Specify appropriate manufacturing accuracy and surface roughness. The cost of metal stamping parts will increase with the improvement of accuracy, especially in the case of high accuracy, this increase is extremely significant. Therefore, high accuracy should not be pursued when there is no sufficient basis. Similarly, the surface roughness of metal stamping parts should also be appropriately specified according to the actual needs of the mating surface. Hardware, 15 years of ingenuity and focus on Dongguan hardware stamping factory, 20,000+ sets of customized mold production experience, daily production capacity of 3 million punches, stamping accuracy can reach ±0.01mm, 16 quality inspection layers are strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!