Dongguan metal stamping parts processing, excellence in quality + 3 million punching next-day production capacity manufacturers

In the processing of metal stamping parts in Dongguan, I often hear from friends that in the stamping production process, there will be some unevenness in the stamping parts, which not only affects the efficiency, but also reduces the quality, which has a great impact on customers. Xiaoshuo shares a few points with you to solve this quality problem: 1. Inspection and correction of drawing dies: Regular inspection and maintenance of drawing dies are required to reduce the occurrence of convexities and maintain a stable state. The usual method is to use samples to check the bonding scratches and processing surfaces of the blank holder (die fillet, punch fillet). 2. Inspection and correction of the shearing die: the reason for the unevenness after the shearing process is that iron powder is produced during the shearing process, so the iron powder must be observed before punching to avoid the occurrence of unevenness. 3. Proper manipulator speed: For semi-automatic drawing die production, when the drawing punch is at the lower die position and the manipulator speed is fast, burrs will fall on the upper part of the punch, causing bumps. In order to avoid this kind of problem, we can do a discharge test of the part before production, and set the speed and discharge angle of the manipulator reasonably so that it will not touch the part and the lower mold. 4. Check the cut surface: When cutting the coil material, the wear and breakage of the cutting die will produce a lot of tiny iron powder attached to the cutting edge, so the double cut surface must be checked in the material area or the press line before stamping production, and cleaned in time The sheet is deburred. Hardware, 15 years of ingenuity, focusing on the processing of metal stamping parts in Dongguan, 5000 square meters production workshop, hundreds of precision processing production equipment, 20000+ sets of precision stamping die customized production experience, daily production capacity of 3 million punching times, and stamping accuracy up to 0.01mm,16 The quality inspection is strictly controlled at all levels. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!