Xi'an stamping parts processing plant, are you aware of the use of continuous stamping die strips?

Xi’an stamping parts processing plant, today Xiaoshuo will learn with you about the use of continuous die strips in stamping dies. I hope to help you: 1. Single-sided tape type: Widely used in connector terminals and smaller stamping parts. 2. Double-sided belt material type: Mainly suitable for larger stamping parts with complicated features, high bending height, wide material width, and easy to deform during the belt conveying process. It cannot be conveyed by a single-sided belt. Alternatively, you can choose the double-sided tape type. 3. Double material belt type: The double material belt type is mainly derived from the double-sided material belt type, and the purpose is also to save material. When the double-sided material belt is used, the two side material belts are required to carry the material. The previous side-by-side material belt can save material for one material belt. This design can also produce different stamping products, but the stamping products need to have the same quantity required at the same time. This is not the case when arranging the same stamping products. 4. Double independent material belt type: The double independent material belt is generally designed for material saving. The two stamping products are arranged oppositely to achieve the purpose of saving materials. It is also possible to stamp two different stamping products on each side at the same time. For example, when stamping different products, the stamping products must have the same quantity required at the same time. This is not the case when arranging the same stamping products. 5. Intermediate strip type: Mainly suitable for products with lower size requirements and lower stamping accuracy. Using this design method can generally improve material utilization, but the relative stamping accuracy and stamping speed are relatively poor, and it is generally not recommended to use This model design. Hardware, 15 years of ingenuity and focus on Xi’an stamping parts processing plant, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!