Dongguan hardware stamping processing, based on customer demand as a result + 15 years of focus on strength production plants

Dongguan hardware stamping processing, Xiaoshuo firmly believes that the sunshine mentality is half the success of doing things. Everything is formed by thinking and becoming by diligence. There are some more complicated stamping parts, and the properties of metal materials will be different according to the different materials selected. You will encounter a lot of material rebound problems, Xiaoshuo will understand with you: Analysis of the reasons for the rebound: The rebound of the material causes the product to be unqualified; The positioner is worn and deformed, which makes the strip positioning inaccurate and must be replaced with a new one Positioner; In a non-guided bending die, when the press is adjusted on the press, the lower dead center position of the press slide is not adjusted properly, which will also cause the shape and size of the bent part to be unqualified; the die pressing device malfunctions or does not work at all For the pressing effect, the pressing force must be readjusted or the pressure spring must be replaced to make it work normally. In view of the poor springback of Dongguan hardware stamping processing, Xiaoshuo suggests to deal with the opinions: Choose stamping materials with large elastic modulus and small yield point and stable mechanical properties; Increase the correction process, and use correction bending instead of free bending; The material should be annealed before bending. Make the cold-work hardened material soften in advance and then bend it into shape; if the shape is deformed during the stamping process and is difficult to remove; the slope of the punch and the die should be replaced or trimmed, and the gap between the punch and the die should be equal to the smaller material thickness; The contact area between the large die and the workpiece reduces the contact area between the punch and the workpiece; Hardware, 15 years of focusing on Dongguan hardware stamping processing, 20000+ sets of mold customization processing and production experience, product accuracy can reach 0.01MM, 3 million strokes The daily production capacity and 16 quality inspections are strictly for quality control. It can quickly solve your time-critical problems, solve your product accuracy problems, and solve your hardware stamping parts quality requirements. Choose, choose to rest assured!