How does a metal stamping factory maintain stamping dies?

Today, Dongguan's global 1500 companies choose, Dongguan Strength Hardware Stamping Processing Factory Hardware is here to introduce 'how to maintain molds'. With the change of weather, molds are now greatly affected. In order to extend the service life of molds, reduce Production costs, maintenance of molds are indispensable. So how to maintain the mold? Let's take a look together next. 1. Maintenance during mold loading: 1. Clean the upper and lower surfaces of the mold before loading the mold to ensure that the mold mounting surface and the press table are not crushed and the mold is parallel to the top and bottom mounting surfaces during production. 2. After the mold is installed, open the mold and wipe all parts of the mold clean. Special attention should be paid to the guiding mechanism. For the surface mold, the surface must be cleaned to ensure the quality of the part. 3. Lubricate each sliding part of the mold and apply grease. 4. Inspection of all parts of the mold, especially safety parts. For example: safety side pins, safety screws, side guards, punching waste channels, etc. 2. Maintenance during production: 1. Regularly apply oil to the corresponding part of the mold during production. 2. Regularly clean the small hole waste passage of the trimming punching die. 3. Maintenance after production: 1. After production, the mold must be inspected comprehensively. 2. Thoroughly clean the mold to ensure the cleanliness of the mold. 3. Clean up the waste in the mold to ensure that there is no waste in the waste box. The metal stamping processing plant summarizes: we have used the mold for a long time and want to use it for a long time, and maintenance is indispensable. The above is about how to maintain the mold. 15 years of stamping experience in hardware, welcome to inquire