How to deal with the surface of metal stamping parts? Understand in 3 seconds after reading!

Everyone may have heard of metal stamping parts. We will also perform certain treatments on the surface of the current stamping parts, not only for appearance, but also to extend the service life of metal stamping parts. Surface polishing processing: Surface polishing processing is generally used in daily necessities. By performing surface burr processing on hardware products, for example, we produce a comb. The comb is a hardware piece made by stamping, so the corners of the stamped comb are very For the sharp ones, we will polish the sharp corners into a smooth face. Spray paint processing: The hardware factory uses spray paint processing when producing large hardware products, and the metal parts are prevented from rusting through the spray paint processing, such as daily necessities, electrical enclosures, handicrafts, etc. Electroplating: Electroplating is also one of the most extensive processing techniques for hardware processing. The surface of hardware is electroplated through modern technology to ensure that the product will not be moldy or embroidered under long-term use. Common electroplating processing includes screws, stamping parts, and battery chips. , Car parts, trinkets, etc. 1. The pre-plated material is more shaped: Depending on the functionality of the product, the material that will be used to complete the electroplating. Because the characteristics of the plated material and the characteristics of the substrate are different, the appearance is also finer and brighter, so more intense forming and If the forming R is too small, the path is not smooth during the forming process, resulting in excessive friction that damages the surface coating and reduces its electrical characteristics. It often uses fitter polishing, increases R, and increases work stations for optimization. 2. Feeding is not allowed to be fed by mistake: During the feeding process of the material belt, its feed stroke (Pitch) will change, resulting in a difference in the size of the finished product. In severe cases, the wrong feeding can no longer be fed. A hardware manufacturer that has focused on precision stamping for 15 years, with a daily production capacity of 3000000+ stampings, and the stamping precision can reach ±0.01mm. Welcome to call for cooperation.