Hardware stamping parts manufacturers, what problems should be paid attention to in stamping processing

Metal stamping parts manufacturers, in the process of production, will meet the different requirements of different products and the production process will also be different. What problems should be encountered in stamping processing? Xiaoshuo will take you to understand: The shape of the bending part should be as symmetrical as possible, and the bending radius should not be less than the small bending radius allowed by the material. The curved side is too short to be easily formed, so the straight part of the curved side should be made H>2δ. If H is required to be very short, you need to leave a proper margin to increase H, and then cut off the added metal after bending. When bending parts with holes, in order to avoid the deformation of the holes. The second is the requirement for deep-drawn parts. The shape of metal stamping parts should be simple and symmetrical, and the depth should not be too large. In order to make the drawing times less and easy to form. The fillet radius of metal stamping parts does not increase the process procedure. Otherwise, it will inevitably increase the number of deep drawing and shaping work, and also increase the number of molds, and it is easy to produce waste and increase the cost. Whether the mold used for metal stamping parts adopts an elastic discharge plate or a fixed discharge plate depends on the size of the discharge force. , The material thickness is the main consideration. With the enhancement of the elastic force of the elastic element used in the mold (such as the use of a rectangular spring), the discharge force of the elastic discharge plate is greatly enhanced. Metal stamping parts are forming processing methods that rely on presses and molds to apply external force to plates, strips, pipes and profiles to cause plastic deformation or separation, so as to obtain workpieces (stamping parts) of the required shape and size. Hardware, 15 years of ingenuity and focus on hardware stamping parts manufacturer, 20,000+ sets of mold customization production experience, monthly processing of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 quality inspections. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!