Plan for improving the utilization rate of stamping parts

Auto stamping parts are very important to the role of cars. Except for some die-casting parts on each car, most of the metal parts are stamped parts. Precision-Committed to customized processing of precision stamping parts, with more than 10 years of experience. For the stamping processing plant, it is particularly important to improve the material utilization rate of stamping parts, which is related to the processing cost of stamping parts. So how can stamping parts manufacturers improve the material utilization rate of stamping parts? Let the precise author tell you. 1. Optimize the shape of stamping parts. Among the automobile stamping parts, the spatial geometric specifications of the car body stamping parts are very large, and the shape design of the stamping parts is relatively complicated. It is very difficult to increase the utilization rate of raw materials. The side wall and back part of the structural modeling design The layered position has a greater impact on the overall raw material utilization rate. After the product design is optimized separately, the utilization rate of its raw materials can be improved a lot. 2. Product optimization. Because of the deep side door stamping parts, it is difficult to form. In addition, the raw material consumption rate is low. Therefore, the anti-theft lock part of the rear door panel is deepened to reduce it by 40mm, and the space between the panels can be greatly reduced. 3. The stamping process is optimized. The forming process of the left and right side beams is deep drawing. According to its process and forming technical standards, the process is upgraded from deep drawing to die forming. After the process is improved, the raw material usage rate can be greatly increased from the original one. improve. 4. Process complement and optimization Process fill is a relatively important part of the die surface of stamping parts, and its shape also affects the utilization rate of raw materials. Generally, under the prerequisite of ensuring the formability of stamping parts, the drawing at the corners of the product should be basically flush with the blanking surface, so that drawing is reduced to a large extent, and the improved process is supplemented and optimized with less in the width direction. The size can also improve material utilization. [Related Recommendations] Learn more: How can the structure of stamping parts be reasonable? Learn more: How to avoid the bumps of metal stamping parts Learn more: The four basic processes of stamping processing