Botou metal stamping parts processing plant, forming process + stamping accuracy up to 0.01mm

The forming process refers to the plastic deformation of the blank under the condition of not being destroyed to form a part with the required shape and dimensional accuracy. The technicians of the Botou metal stamping parts processing plant have introduced the name and characteristics of the forming process. Xiaoshuo has collected some information, and I will share it with you below: Bending: Use a mold to bend the sheet into a certain angle of the part, or Bend the piece again. Stretching: Use a mold to press the sheet into a hollow part of any shape, or further deform the hollow part. Flanging: Use a mold to turn the hole or the outer edge of the sheet into a straight wall. Bulging: A mold is used to apply an outward radial force to the hollow part to expand the local diameter. Neck: Use a mold to apply radial pressure from the outside to the mouth of the hollow part to reduce the local diameter. Extrusion: Put the blank in the mold cavity and press it to extrude it from the gap of the mold to form a hollow or solid part. Round: Roll the end of the sheet into a close-closed round head to process parts like hinges. Flaring: A deformation method that expands the radial size of a hollow or tubular blank on a certain part. Shape correction: flatten the uneven surface of the workpiece; press the bent or drawn workpiece into the correct shape. Dongguan Hardware Co., Ltd., 15 years of experience in stamping parts production, top 500 corporate partners, more than 20 mold Ru0026D and design engineers, 5,000 square meters workshop, hundreds of precision processing production equipment, 3 million punching next-day production capacity, 20,000+ sets of stamping Customized mold production experience, the precision of stamping parts can reach 0.01mm. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!