Precision metal stamping parts processing, a method to avoid distortion in the processing of stamping parts

The main reason for distortion in the processing of precision metal stamping parts is the influence of the punching force. When stamping, there is a gap between the punching gaps, so the stamping material will be stretched on the side of the die, and the side of the punch will be compressed. Therefore, during the stamping process, the compression of the material is to prevent Distortion occurs during the stamping process. 1. The stamping die we use must be designed reasonably. Under normal circumstances, in the stamping process, the order of blanking may also affect the accuracy of stamping. Therefore, we are stamping relatively small parts At the time, arrange a larger area of u200bu200bpunching and blanking, and then arrange a smaller area to reduce the impact of the punching force on the stamping parts. 2. It is to compress the material. First of all, what we need to overcome is the traditional mold design method, which can balance the movement of the discharge plate during the stamping process. This can also enable the material to be compressed. The discharge plate must be used as an insert at the key position.式结构。 Type structure. 3. That is, we can trim the end of the punch to bevel or orphan. This is also a limited way to reduce the impact of stamping processing and relieve the impact of the impact, so as to achieve the same effect of turning and distortion in the production of stamping parts. Hardware, 15 years of ingenuity and focus on precision metal stamping parts processing, 20000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, 3 million punching capacity per day, stamping accuracy up to 0.01mm, 16 quality inspection layers Strictly check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!